Vacuum Diamond Dry Drilling Tile Core Drill Bit, these special diamond core drill bit benefit from fully exposed diamonds that are vacuum brazed directly to the cutting edge. Vacuum brazing is a material joining process which offers significant advantages in terms of cleanliness, joint strength and integrity making the hole saws durable and convenient to use when drilling a vast variety of materials. hard wearing layer of diamonds along with a special “Wax” cooling central core means these diamond core drill bit can be used with no water. Must use at high drilling speeds, 2000 to 2500 rpm & with very light drilling pressure to ensure best performance.

Vacuum Diamond Dry Drilling Tile Core Drill Bit

·  Vacuum Brazed Diamond Grit Edged

·  Use the pilot drill to aid start up

·  For best results when drilling tiles, apply a fine mist of water via a hand-held spray bottle.

·  Using a slight oscillating motion whilst drilling can increase speed on some materials

·  Use at High Speeds, 2000-2500+ rpm, For harder tiles use a slower rpm / for softer tiles use a faster rpm.

  

All your favorite Power Tools Accessories in one place -Greetools. Greetools® Tools mataching system.

Get full sizes of Glass and Tile Drill Bit and a free quote, please give us a call or drop us an email. We will get back to you quickly and design a right solution for your reference. Performance through opportunity.

Hotline : 0086 (0)731 89672080
Email : contact@greetools.com

  

All your favorite Power Tools Accessories in one place -Greetools. Greetools® Tools mataching system.

We recommend you related products as listed below. for more related products,Please move the mouse on navigation bar Drilling, select and click the subject of Glass&Tile Drilling inside for details. Can not find the products you need in our site? welcome you give us a call or drop us an email. We are here to help you.

Hotline : 0086 (0)731 89672080
Email : contact@greetools.com

001      Spear Point Carbide Glass&Tile Drill Bit     Click for details

002      Hex Shank Carbide Tip Glass&Tile Drill Bit   Click for details

003      Titanium Coated Cross Head Glass&Tile Drill Bit  Click for details

004      Vacuum Diamond Dry Drilling Tile Drill Bit    Click for details

005      Electroplated Diamond Wet Drilling Glass&Tile Drill Bit    Click for details