Drilling Blog

• Learn Masonry Drill Bits Buying Guide

  The Tungsten Carbide tipped masonry drill bits are used on percussion drills and cordless drilling machines with percussion action, available in straight shank, round shank, hexagonal shank, Triangle shank, Tapcon half flat shank, Taper shank. Ideal for drilling holes for a wide range of masonry typ

  Drilling Blog August 28, 2018
• Choosing the Right Power Tools for Your Perfect Work

  A Power Tool is one of the most important tools in any workshop or site, and with the right Power Tool, You can get the job done quickly and efficiently whether drilling,cutting,chiseling,grinding, polishing,routing or sawing and so. Power tools can make a massive difference, and save you a lot of time.

  Drilling Blog August 28, 2018
• Choosing the Right Tool for Concrete Drilling and Demolition

  By Mike IezziA combihammer combined with a dust-extraction bit drills holes cleanly.When it comes to drilling or demolishing concrete, there seems to be an endless array of specialized tools claiming to be up to the task. However, the sheer number of tools designed to power through concrete can some

  Drilling Blog August 17, 2018
• HSS Twist Drill Bits -Trouble Shooting Guide

  Trouble shooting guide-twist drills• Irregular hole size• Chipping of corner edge　• Low position accuracy• Chipping of cutting edge　• Hole perpendicularity• Abnormal wear on corner part　• Bad cylindrical accuracy• Large wear and chipping, crushing of the chisel edge• Poor surface finish• Chipping of

  Drilling Blog August 09, 2018
• HSS Twist Drill Bits Operating Instruction

  HSS TWIST DRILL BITS 1. Raw material: HSS4241,HSS 6542,HSS M35 with 5% Cobalt2. Surface finish: Black, Bright, TiN3. Technology: Roll-edged, Fully ground4. Standard: DIN338,DIN340,DIN18975. Shank: Straight ,Taper Shank6. Cutting angle: 118º Standard Point. 135º Split

  Drilling Blog August 09, 2018
• Knowledge about SDS (SPECIAL DIRECT SYSTEM) DRILLS

  SDS (Special Direct System) Drills are extremely powerful and used when extra power is required, for heavy duty jobs. They have three basic functions that allow normal drilling, hammer action and chiseling. Furthermore, SDS Drills can hold large diameter drill bits well passed the 13mm diameter limit of normal drills.

  Drilling Blog August 08, 2018